|
 |
| Quantity | Price |
|---|
| 1-50 | $ 0.91 | | 51-100 | $ 0.85 | | 101-300 | $ 0.82 | | 301- Up | $ 0.78 |
Single Pocket Magnetic Badge Holder
ID card slides into holder, and two magnets hold it on a shirt or coat pocket. No clip or pin needed, so there´s no damage to fabrics!
| |
|
|
 |
| Quantity | Price |
|---|
| 1-50 | $ 1.13 | | 51-100 | $ 1.06 | | 101-300 | $ 1.03 | | 301- Up | $ 1.00 |
ID card slides into holder, and two magnets hold it on a shirt or coat pocket. No clip or pin needed, so there´s no damage to fabrics!
| |
|
 |
| Quantity | Price |
|---|
| 1-50 | $ 1.13 | | 51-100 | $ 1.06 | | 101-300 | $ 1.03 | | 301- Up | $ 1.00 |
ID card slides into holder, and two magnets hold it on a shirt or coat pocket. No clip or pin needed, so there´s no damage to fabrics!
| |
|
 |
| Quantity | Price |
|---|
| 1-50 | $ 1.24 | | 51-150 | $ 1.14 | | 151-300 | $ 1.11 | | 301- Up | $ 1.07 |
Personnel at many companies must carry two ID cards.
There are no clips or pins to damage clothing, and shielded magnets are available, which won´t erase cards with magnetic stripes.
| |
|
 |
| Quantity | Price |
|---|
| 1-50 | $ 1.12 | | 51-100 | $ 1.05 | | 101-300 | $ 1.02 | | 301- Up | $ 0.99 |
The circular flap is worn on the outside of a pocket. Attaching an embroidered patch to this flap eliminates having to sew on the emblem and make it easy to remove or re-attach it. The larger flap is worn inside the pocket and can hold a credential or business cards.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.55 | | 101-300 | $ 0.52 | | 301-500 | $ 0.50 | | 501- Up | $ 0.48 |
With heavy tear resistant clear vinyl, these holders are made to last. The quality bulldog clip can be rotated for convenience.
Vinyl is .030” thick on back and .012” thick on front.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.55 | | 101-300 | $ 0.53 | | 301-500 | $ 0.50 | | 501- Up | $ 0.48 |
With heavy tear resistant clear vinyl, these holders are made to last. The quality bulldog clip can be rotated for convenience.
Vinyl is .030” thick on back and .012” thick on front.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.62 | | 101-300 | $ 0.60 | | 301-500 | $ 0.58 | | 501- Up | $ 0.55 |
With heavy tear resistant clear vinyl, these holders are made to last. The quality bulldog clip can be rotated for convenience.
Have a side opening bottom pocket that holds a second insert for company service pins or imprinting.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.45 | | 101-300 | $ 0.43 | | 301-500 | $ 0.41 | | 501- Up | $ 0.39 |
Same heavy vinyl as our Clip-On ID Holders. And two-pocket versions are now available with an extra pocket on the back.
Vinyl is .030” thick on back and .012” thick on front.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.45 | | 101-300 | $ 0.43 | | 301-500 | $ 0.41 | | 501- Up | $ 0.39 |
CH506-T1 Hang Holder
3-13/16" x 3-1/16"
Quantity Discounts available.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.63 | | 101-300 | $ 0.60 | | 301-500 | $ 0.59 | | 501- Up | $ 0.57 |
S-Series Holders are softer, more flexible material carries thicker cards without splitting. And the holders have no clip attached; they are slotted through the front and back. Using a strap clip keeps metal further away and locks the card into the holder.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.75 | | 101-300 | $ 0.73 | | 301-500 | $ 0.70 | | 501- Up | $ 0.68 |
Heavy Duty Proximity Card Holder with a heavier .030” thick back.
| |
|
 |
| Quantity | Price |
|---|
| 1-100 | $ 0.89 | | 101-300 | $ 0.87 | | 301-500 | $ 0.85 | | 501- Up | $ 0.80 |
A permanent way to secure a proximity card. And a separate photo ID card can be locked in with the proximity card if desired.
| |
|
 |
| Quantity | Price |
|---|
| 1-50 | $ 0.98 | | 51-100 | $ 0.95 | | 101-300 | $ 0.93 | | 301- Up | $ 0.91 |
For easy card removal these rigid molded card cases have a large cut-out in the back. The anti-reflective polycarbonate material helps prevent UV rays from fading your ID card.
Vertical format is available in top loading or side loading styles.
| |
|
 |
| Quantity | Price |
|---|
| 1-50 | $ 1.62 | | 51-100 | $ 1.61 | | 101-250 | $ 1.57 | | 251- Up | $ 1.54 |
Snapping the end piece into place locks the holder closed until it is unlocked with a special key (sold separately). Now you can issue cards locked into the case that can’t be tampered with until they’re returned to your badging office to be changed. This rigid, polycarbonate case holds up to two standard thickness cards (.030” per card or .060” total).
| |
|
|
